If you’ve ever tried to make coffee in a trailer that wobbles wiht every step, you know how quickly “cozy” turns into “chaotic.” On our last few trips, we put the Camco EAZ-Lift 24-inch Stabilizing RV Scissor Jacks (model 48830) to work to tame that side-to-side shimmy after leveling.Billed at 7,500 lb capacity per jack and built from heavy-duty, powder-coated steel, they promise a sturdier, calmer setup without eating up storage space.
These are stabilizers,not primary lifting gear,and we treated them as such-level first,then deploy. The adjustable height (roughly 4 3/8 inches to 23 3/4 inches) gave us enough range to deal with an uneven campsite and a sloped overnight stop, and the compact frames tucked neatly into our storage bay.We opted for a bolt-on install to our trailer’s frame, and the included drill socket made raising and lowering much quicker than cranking by hand.
In this review, we’ll share how these EAZ-Lift scissor jacks performed in real conditions-setup, stability, noise reduction, and durability after a couple of wet weekends-along with what impressed us, what didn’t, and whether this set of two fits the bill for your rig.
Our overview of the Camco EAZ Lift stabilizing RV scissor jacks
We found these stabilizing scissor jacks deliver the rock‑solid feel we want when a campsite isn’t perfectly level. Each unit boasts a 7,500 lb load capacity, and the heavy‑duty steel with a powder‑coated, rust‑resistant finish inspires confidence through rain, dust, and road grime. With a compact profile and a customizable height range from 4 3/8″ to 23 3/4″, we can dial out shake and shimmy quickly-whether we’re setting up on gravel, dirt, or cracked asphalt.
- Effortless stability: Dials out movement for a more agreeable interior.
- Flexible height: adapts to uneven terrain in seconds.
- Built to last: Robust steel and protective coating resist the elements.
- Space‑savvy: compact design stores easily between trips.
| Capacity | 7,500 lb per jack |
| Height Range | 4 3/8″ – 23 3/4″ |
| Construction | Heavy‑duty steel |
| Finish | Powder‑coated, rust‑resistant |
| Installation | Bolt‑on or weld‑on |
| Included | 2 jacks + power drill socket |
| best for | Pop‑ups, trailers, and large RVs |
Installation is refreshingly straightforward with bolt‑on or weld‑on options, and the included power drill socket turns setup into a swift, low‑effort routine-just grab a cordless driver and you’re done. Versatility is a highlight: these jacks adapt well to pop‑ups, travel trailers, and other larger rigs, minimizing sway on a variety of surfaces so we can settle in faster and enjoy a steadier stay.
See today’s price and check availability
Features and performance that stood out build quality stability and setup
Build quality is the first thing that impressed us-these scissor jacks feel purpose-built. The heavy-duty steel frame and powder-coated finish give them a durable, rust-resistant edge, and the compact profile makes storage a non-issue. In use, the 7,500 lb load capacity (each) and adjustable height from 4 3/8″ to 23 3/4″ translate to confident, rock-steady support on campsites that aren’t perfectly level.Movement inside the rig is noticeably reduced, lending a calmer, quieter feel to everyday activities.
Setup is refreshingly straightforward. We appreciate the choice of bolt-on or weld-on installation for different builds, and the included power drill socket speeds the drop-and-tighten process, with a crank handle as a reliable backup. Versatility also stands out-equally at home under pop-ups, travel trailers, and other larger vehicles-making these jacks a dependable foundation for repeated, hassle-free stops.
- Stability: Firm, confident support on uneven terrain
- Speed: Fast deployment with a drill; precise finish by hand
- Durability: Steel construction with rust-resistant coating
- Adjustability: Wide height range for varied campsites
- Versatility: Works across multiple RV and trailer types
| Feature | what We Noticed |
|---|---|
| Load Capacity | 7,500 lb each-stays solid under pressure |
| Height Range | 4 3/8″ to 23 3/4″ for tricky sites |
| Material | Heavy-duty steel, powder-coated |
| Install | Bolt-on or weld-on versatility |
| What’s Included | 2 jacks + drill socket + crank handle |
Check price and see today’s availability
Detailed insights from the road and our recommendations
Out on mixed terrain-from gravel pull-throughs to lumpy boondocking pads-we found these scissor jacks deliver the kind of rock-steady feel that calms the RV shakes. the adjustable height range (about 4 3/8″ to 23 3/4″) let us dial in a firm stance without overextending, and the heavy-duty steel with a protective finish shrugged off wet mornings and road grime. The 7,500 lb per jack rating inspired confidence, while the compact profile kept storage simple. With the included drill socket/crank, setup was fast enough that we were sipping coffee before sunrise quiet hours were over.
- Stability on uneven pads: noticeably reduces side-to-side sway.
- Quick deployment: Power-drill option speeds the last-mile setup.
- Space-savvy: Low retracted height fits small compartments.
- Built to last: Powder-coated steel resists rust and road wear.
- Flexible mounting: Bolt-on or weld-on to suit your rig and tools.
| Spec | On-road takeaway |
| 7,500 lb capacity (each) | Plenty of headroom for stability duty |
| 4 3/8″-23 3/4″ height | Handles sloped and uneven campsites |
| Steel,powder-coated | Confident weather resistance |
| Pair + drill socket/crank | Ready-to-deploy kit |
| Bolt-on or weld-on | Installation your way |
Our recommendations: mount the pair near structural points to maximize anti-sway,and use broad base pads on soft ground to keep them from digging in. We like to level the rig first, then use these for final stabilization-that sequence preserved thread life and delivered the most solid feel inside. If you’re handy, bolt-on is a weekend-kind install; weld-on feels more permanent for rough-road travelers. Keep the screws clean and lightly lubricated, and stash a compact drill adapter in the front bay for quick, even deployment across both sides. For pop-ups, trailers, and larger campers, the versatility here makes them an easy go-to when we want a quiet, no-wobble evening.
Check availability and today’s price
Pros & Cons
Pros
- Serious stability: each jack is rated to 7,500 lb, which kept our trailer rock-solid once dialed in.
- Broad adjustability: 4 3/8″ to 23 3/4″ height range made uneven campsites easy to tame.
- Built to last: heavy-duty steel with a powder-coated, rust-resistant finish inspires confidence.
- Flexible install: bolt-on or weld-on options let us match our rig and tools.
- Compact footprint: folds low for storage without hogging compartment space.
- Quick deployment: included power drill socket (and crank handle) sped up setup and teardown.
- Good value as a pair: two jacks cover the essentials for smaller trailers and pop-ups.
Cons
- Stabilizers, not lifters: not intended for tyre changes or primary leveling of the whole RV.
- Soft ground caveat: benefits from pads/blocks to prevent sinking and side-to-side wiggle.
- Muscle or battery needed: without a drill,manually cranking two (or four) jacks takes time.
- Height ceiling: the 23 3/4″ max might potentially be tight for lifted rigs or very tall frames.
- Install effort: drilling or welding is straightforward but still a project for first-timers.
| Best For | Not Ideal For |
|---|---|
| Pop-ups, small to mid trailers | Heavily lifted or extra-tall rigs |
| Campers seeking rock-solid stability | Using as a primary lifting jack |
| DIYers who can bolt or weld | No-tools, zero-install solutions |
| Fast setup with a cordless drill | Manual-only setups in a hurry |
Q&A
Q: What are these jacks for-leveling or stabilizing?
A: They’re stabilizers,not primary levelers. We use them to take the shake and bounce out of the RV once it’s already leveled and chocked. They’re not intended to lift the RV for tire changes or repairs.
Q: How much weight can they handle?
A: Each jack is rated up to 7,500 lb. In practice, that capacity is for stabilizing a portion of the RV’s weight at a corner or frame point, not for lifting the entire rig off the ground.
Q: What’s the height range?
A: We measured a collapsed height of about 4 3/8 inches and an extended height just under 24 inches (approximately 23 3/4). That range made it easy to snug up to the frame on both level pads and lumpy campsites.
Q: Will they fit our trailer or pop-up?
A: They’re designed for pop-ups, travel trailers, and similar towables. If your frame has room for a scissor jack footprint near the corners, you’re likely good to go. For unusually low ground clearance or unique frames, double-check mounting space first.
Q: what’s in the box?
A: Our set included two scissor jacks plus a power-drill scissor jack socket. Some listings also mention a hand crank; contents can vary by retailer, so we recommend confirming before you buy.
Q: How do we install them?
A: You can bolt them to the frame or have them welded. We went the bolt-on route for flexibility.Plan your mounting points, use the manufacturer’s instructions, and ensure you’re fastening into solid frame steel-not thin sheet metal or underbelly material.
Q: Can we run them with a cordless drill?
A: Yes. The included drill socket makes quick work of deployment and retraction.We keep the drill on a low speed with the clutch engaged to avoid over-torquing.
Q: Do they actually cut the wobble?
A: In our test on packed gravel,they noticeably reduced side-to-side sway and the trampoline effect when someone stepped inside. The RV felt more “planted,” especially when paired with wheel chocks and front jack stabilization.
Q: Are two jacks enough?
A: Two will stabilize one end of many trailers. For best results on longer rigs, we prefer four-one near each corner-so movement is minimized across the entire floorplan.
Q: How do they hold up to weather?
A: The heavy-duty steel and powder-coated finish are built to resist rust. We still give the screws a light lube and rinse off road grime now and then; a quick wipe after salty or muddy trips helps.
Q: Any tips for uneven terrain?
A: We carry a few sturdy pads or blocks. They help with soft ground, reduce sinking, and can keep you within the optimal extension range so the jacks don’t have to reach their max height.
Q: Can we lift a wheel off the ground with these?
A: No-use proper lifting equipment and follow your RV manufacturer’s instructions for tire or suspension work. These are for stabilization only.
Q: Do they make noise?
A: Once snugged up, we heard minimal creaks. A dab of lubricant on the screw and pivot points quieted any start-up chatter.
Q: what maintenance do they need?
A: A seasonal check is plenty for us: inspect mounting hardware, wipe down the threads, and apply a light lubricant to the screw. If you camp in sand or slush, clean them sooner.
Q: Are they compatible with leveling blocks and other accessories?
A: Yes. We level first with blocks or our tongue jack, then deploy the scissor jacks to stabilize. Pairing them with pads under the feet spreads the load and boosts stability.
Q: Any safety reminders?
A: Chock your wheels, level first, then stabilize. Don’t crawl under an RV supported only by stabilizer jacks, and avoid using impact drivers that can over-torque and damage the screw.
Q: What model is this set?
A: Camco EAZ-Lift 24-inch Stabilizing RV Scissor Jacks, Set of 2 (48830). they’re rated 7,500 lb each, powder coated, and designed for bolt-on or weld-on installation.
Q: Who should buy this set?
A: Campers who want reliable, heavy-duty stabilization in a compact package. if you’re battling campsite wiggle and want a sturdier feel without adding much bulk, these fit the bill.
Ignite Your Passion
Wrapping up our hands-on with EAZ-Lift’s 24-inch RV Stabilizer Jacks, we’re satisfied with how reliably they take the “wiggle” out of camp. The 7,500 lb load capacity per jack, stout steel construction, and broad height range make them a dependable, space-efficient way to steady pop-ups and travel trailers on uneven sites. Installation flexibility (bolt-on or weld-on) and the included tool support keep setup straightforward.
They’re stabilizers, not levelers, and in that role they perform exactly as advertised-firming up the campsite so we can move around without the trailer shimmy. If your goal is a calmer, more comfortable interior without overcomplicating your kit, these are an easy add.If you’re ready to dial down the bounce on your next stop, check current pricing and availability here:
Shop the Camco EAZ-Lift 24-inch Stabilizing RV Scissor Jacks (Set of 2)
Reviews
There are no reviews yet.